On this page you can enable the Endian Hotspot on the BLUE zone by ticking on the checkbox labeled Enabled on BLUE and then hitting the button. For further configuration options you have to click on the Hotspot administration interface link which will then open a new page.
Note
In order to be able to run the Endian Hotspot you will have to have the BLUE zone enabled. The IP of the BLUE interface must belong to a C-class network and it must end with a trailing .1 e.g. 192.168.20.1/24. The bridge for the BLUE zone does not support more than one port.
Note
Usually the hotspot is intended for use with wireless networks, however this is not mandatory. It is as well possible to connect a normal switch to the BLUE LAN port. Please note also that there is no wireless access point supplied with Endian Firewall.
Tip
If you are running a Community version of Endian Firewall and are wondering where your Endian Hotspot may be just upgrade to Endian Firewall Enterprise Edition.
This page was last modified on: $Date: 2006-11-22 00:47:05 +0100 (Wed, 22 Nov 2006) $.