In this page you find:
This page shows three tabs, which allow to manage local Users, local Groups, and Settings for remote authentication
In this page, all users that have an account on the Endian 4i Edge Appliance’s VPN server are displayed in the table, and for each the following information is shown:
Name. The name of the user.
Remark. A comment.
Authentication server. The server used for the user authentication, which is either local (the Endian 4i Edge Appliance itself) or LDAP (an external LDAP server, configurable in the Settings tab).
Actions. The available operation that can be carried out on the account. For LDAP users they are Enable/Disable and Edit, for local users, there is also the possibility to Delete . Editing an LDAP user only allows to modify its local options, not of other data like username or password, which are entirely managed by the LDAP server.
Click on Add new local user above the table to add a new local account. In the form that will show up, the following options can be specified for each user.
The login name of the user
An additional comment.
This checkbox is only visible if at least one external authentication server has been configured. Once it has been selected the following password input fields will disappear and the user will be authenticated by using the external authentication servers.
The password for the user, to be entered twice. The passwords are actually not shown: To see them, tick the two checkboxes on their right.
This field contains the TOTP secret for the specific user. Due to the constraints in creating these secrets it is not possible to insert them manually but they must be generated by clicking on the Generate new secret button. A QR code representation of the secret can be displayed by clicking on the Show QR Code button.
One-Time Passwords
There are many different one-time password algorithms. On Endian 4i Edge Appliance systems the Time-based One-Time Password algorithm has been implemented as described in RFC 6238. Since this is an open standard applications exist for almost all devices (Android, iOS and Windows smartphones, PCs etc.). To be able to use your device it needs to be initialized with the One Time Password secret. You can either do this by entering the secret manually or even more easily by taking a picture of the QR code with your application.
Select the mode to assign a certificate to the user. The available modes are selectable from the drop-down menu: Generate a new certificate, Upload a certificate, and Upload a Certificate signing request. Upon selection, below the drop-down menu appear the available options for each mode, which are described in the Certificates page.
The Organisation Unit to which the user belongs to, i.e., the company, enterprise, or institution department identified with the certificate.
The organisation to which the user belongs to.
The city (L) in which the organisation is located.
The state or province (ST) in which the organisation is located.
The Country (C) in which the organisation is located, chosen from those in the selection menu. By typing one or more letters, matching countries are searched for and displayed.
The e-mail address of the user.
In this part of the panel it is possible to assign membership to one or more groups to the user. In the search widget it is possible to filter existing groups to find matching groups. Group membership is added by clicking on the + on the right of the group name. Groups to which the user belongs are show in the textfield below. There are also shortcuts to Add all and to Remove all groups memberships at once.
Tick this checkbox to allow the OpenVPN protocol to be used. This option will reveal a box in which to specify custom option for the account, see below.
Tick this checkbox to show a box in which to choose the L2TP tunnel to be used.
Note
This option can not be selected if no L2TP tunnel has yet been configured. In such a case, an informative message appears as a hyperlink: Upon clicking on it, the IPsec connection editor opens. Once done, it will be possible to allow a VPN user to connect using the L2TP Protocol.
Hint
The box for L2TP options will appear below the OpenVPN options box, if also OpenVPN option are to be overridden
Tick the checkbox to enable the user, i.e., to allow her to connect to the OpenVPN server on the Endian 4i Edge Appliance.
If this option is checked, all the traffic from the connecting client, regardless of the destination, is routed through the uplink of the Endian 4i Edge Appliance. The default is to route all the traffic whose destination is outside any of the internal zones (such as Internet hosts) through the client’s uplink.
For advanced users only. Normally, when a client connects, tunnelled routes to networks that are accessible via VPN are added to the client’s routing table, to allow it to connect to the various local networks reachable from the Endian 4i Edge Appliance. This option should be enabled if this behaviour is not wanted, but the client’s routing tables (especially those for the internal zones) should be modified manually.
When this option is active, the client will have access to the GREEN, BLUE, or ORANGE zone. These options have no effect if the corresponding zones are not enabled.
This option is only needed if this account is used as a client in a Gateway-to-Gateway setup. In the box should be written the networks laying behind this client that should be pushed to the other clients. In other words, these networks will be available to the other clients.
Dynamic IP addresses are assigned to clients, but a static IP address provided here will be assigned to the client whenever it connects.
Note
If the client connects to a multicore VPN server running on the Endian 4i Edge Appliance, this assignment will not be taken into account.
Assign custom nameservers on a per-client basis here. This setting (and the next one) can be defined, but enabled or disabled at will.
Assign custom search domains on a per-client basis here.
Note
When planning to have two or more branch offices connected
through a Gateway-to-Gateway VPN, it is good practice to choose
different subnets for the LANs in the different branches. For
example, one branch might have a GREEN zone with the
192.168.1.0/24 subnet while the other branch uses
192.168.2.0/24. Using this solution, several possible sources
for errors and conflicts will be avoided. Indeed, several
advantages come for free, including: The automatic assignment of
correct routes, without the need for pushing custom routes, no
warning messages about possibly conflicting routes, correct local
name resolution, and easier WAN network setup.
This drop-down menu allows to choose the tunnel that will be employed by the user, among those already defined.
In this page a table is displayed, which shows all the groups that are either defined on the Endian 4i Edge Appliance or on an external LDAP server. For each group the following information are shown:
Groupname. The name of the group.
Remark. A comment.
Authentication server. The server used for the user authentication, which is either local (the Endian 4i Edge Appliance itself) or LDAP (an external LDAP server, configurable in the vpnauthsettings tab).
Actions. The available operation that can be carried out on the account. For LDAP servers the only action is to Edit the local properties, while for local groups there is also the possibility to Delete the group.
Click on Add new local groups above the table to add a new local group. In the form that will show up, the following options can be specified for each group.
The name given to the group.
A comment.
In this part of the panel it is possible to assign users to the group. in the search widget it is possible to filter existing local users to find matching users. Users are added to the group by clicking on the + on the right of the username. Users in the Group are shown in the textfield below. There are also shortcuts to Add all and to Remove all users to/from a group.
Tick this checkbox to allow the OpenVPN protocol to be used. This option will reveal a box in which to specify custom option for the account, which are the same as those specified for the local users.
Tick this checkbox to show a box in which to choose the L2TP tunnel to be used from a drop-down menu.
Note
This option can not be selected if no L2TP tunnel has yet been configured. In such a case, an informative message appears as a hyperlink: Upon clicking on it, the IPsec connection editor opens. Once created a new L2TP tunnel, it will be possible to associate it to a user.
Hint
The box for L2TP options will appear below the OpenVPN options box, if also OpenVPN option are to be overridden
Tick the checkbox to enable the user, i.e., to allow her to connect to the OpenVPN server on the Endian 4i Edge Appliance.
Warning
While the same user can be legally part of one or more groups, care must be taken that the groups the user belongs to do not define contrasting override options. As an example, consider a user member of two groups, one allowing access only to the GREEN zone, and one only to the BLUE. In this case, it is not easy to predict whether that user will be granted or not access to the BLUE or GREEN zone. The management of these issues is left to the manager of the OpenVPN server.
This page contains the current configuration of the authentication servers on which the Endian 4i Edge Appliance relies and allows for their management. Several authentication servers are available: LDAP/Active directory, Local, One Time Password, Radius and Split Data.
There are two tables in this page, one displaying information about Authentication servers, and one showing Authentication server mappings. In the former, this information is shown:
Name. The name given to the server
Type. Whether the server is a local or an external LDAP one.
Service. Which authentication is available for that server.
Actions. For local authentication, it is possible to enable/disable the server, to edit it, or to delete it. For LDAP servers there is also the ability to refresh the connection, for synchronising the users and groups.
The table at the bottom shows the correspondences between a service (e.g. IPsec XAuth, OpenVPN or L2TP) and the type of authentication allowed. The only Actions for the mappings is to Edit them. By clicking on Edit, a form will appear, in which a selector allows to select which authentication backends will be used for that service.
A click on the Add new authentication server link above the tables opens a form in which to supply all data to set up a new authentication server.
This form replaces the tables displaying the already defined authentication servers and allows to configure a new one, by specifying appropriate values for the following configuration options.
The name given to the authentication server.
Tick the checkbox to enable the server.
Select the server type from the drop-down menu. The following options are available:
LDAP / Active Directory
Choose this option if you want to use an LDAP server to authenticate your users. The following options are supported for this type:
The URI of the LDAP server.
This drop-down menu allows the choice of the type of the authentication server among Generic, Active Directory, or Novell eDirectory. Depending on this selection additional fields will be displayed or hidden.
The fully distinguished name of the LDAP account that is used to retrieve user data from the LDAP server.
The password of the bind DN user.
The following options depend on the server setup and are used to identify which users and groups shall be granted access to Endian 4i Edge Appliance’s OpenVPN server: LDAP user base DN, LDAP group base DN. When using a Generic LDAP server type additional parameters must be configured: LDAP user search filter, LDAP user unique ID attribute, LDAP group unique ID attribute, LDAP group member attribute, LDAP group search filter.
Limit to specified groups This option allows to select which groups on the LDAP server are allowed to connect to the Endian 4i Edge Appliance’s OpenVPN server.
Local
Choose this option if you want to create and manage users locally. The following option is available:
Limit to specified groups This option allows to select which groups on the LDAP server are allowed to connect to the Endian 4i Edge Appliance’s OpenVPN server.
One Time Password
Choosing this option will enable two-factor authentication. Just like the Split Data (User Information & Password) server type this works as a proxy for two different providers - additionally it will add two-factor authentication through time-based one-time passwords. Choosing this type will let you select the sources for both the user information as well as the password providers. The fields that need to be configured are:
You can configure them in the following fields:
User information provider This option will let you specify from where the user-specific information should be taken.
Password provider This option will let you choose from the list of configured authentication servers. The chosen server will then be used to authenticate the users.
RADIUS
Choose this option if you want to configure a RADIUS server. Note that RADIUS servers can only be used as password providers in both One Time Password and Split Data authentication servers. To use a RADIUS server the following information must be defined:
RADIUS server The address of the RADIUS server.
RADIUS shared secret The shared secret between the RADIUS server and the Endian 4i Edge Appliance.
RADIUS authentication port The TCP port that is used for the RADIUS authentication.
RADIUS accounting port The TCP port that is used for the accounting.
RADIUS identifier The Endian 4i Edge Appliance’s RADIUS identifier or NAS ID.
Split Data (User Information & Password)
Just like the One Time Password server type this works as a proxy for two different providers - but it does not add two-factor authentication. Choosing this type will let you select the sources for both the user information as well as the password providers. The fields that need to be configured are:
User information provider This option will let you specify from where the user-specific information should be taken.
Password provider This option will let you choose from the list of configured authentication servers. The chosen server will then be used to authenticate the users.